Using the successful ergonomic profile, this new meter has been crammed with new features:

 

High and low signal strength sensitivity ranges
Streamlined menu system
Use of the meter while charging
Switchmode power supply
Adjustable power off time
LNB function test from the meter
Super fast dataset selection
USB data transfer interface. Uses a standard USB Data Transfer Cable - not included)

 

Specifications:
RF Parameters

• Input signal frequency 950MHz~2050MHz

• Input digital signal level -65 dBm~25dBm

• LNB service voltage 13V / 18V

• LNB 22KHz Switch On / Off at 50% Duty cycle
   

Meter Perameters

• Regional settings 4 data sets

• Maximum data locations 120 per regional setting (i.e. 120 transponders from any satellite combination

• Satellite identification Only chosen satellite is found by unique identification software

• Pre-programmed settings As required by local distributors

• Reception standard DVB or DSS/DBS (selectable)

• Modulation standard QPSK

• Symbol rate 1-45Mbit/s

• LNB Polarization voltage control 13v / 18v (Short circuit protection)

• LNB 22KHz control On / Off (0.6VDC at 50% Duty cycle)
   

Satellite digital receiver parameters

• Reception standard DVB-DSS

• Modulation standard QPSK

• Symbol rate 3~40

• LNB polarization voltage control 13V/18V (Short-circuit self-protection)

• LNB 22KHz control ON/OFF

• LCD parameters

• Screen size 66.5mm-25mm

Power consumption

• Whole power consumption 600mhA

• Input voltage 12v DC

• Available use from full charge 4 hours

Power adapter parameters

• Power service voltage AC 120V~240V

• Power frequency 50-60 Hz

• Output voltage 12V DC

• Output current 1.25 A

• Adapter dimensions 80-50-80

• Adapter weight 280gms

• Charge time 10 hours to 90%

Operating conditions

• Operating temperature 0C~80C

• Relative humidity 10%~90%

• Atmosphere pressure 86Kpa~106Kpa

• Robust and lightweight. The unit weighs less than one kilo (2.2 lbs)

• Dimensions 208-86-56

Using SatHawk 4000 ensures fast and accurate installation, and this means higher work rates and greater customer satisfaction. The tool is entirely future-proof as the data used can be re-programmed to reflect changes made by broadcasters to existing services, and their provision of new ones.

 

This portable satellite meter is used for identification of satellite broadcasts throughout the world. The satellite meter is essential equipment where precise satellite identification is crucial - especially true in digital (DVB/DSS) transmission set-up in both the C band and Ku band ranges. Using this satellite meter, with easy adjustment and calibration, the local installer can perform more accurate dish alignment quickly leading to fewer call-backs.

 

This meter is programmable, user friendly and ideal for installation of VSAT, internet-over-satellite systems as well as the digital satellite TV. Analyzing the data stream the satellite meter gives you precise identification of the satellite desired and ignores any others in the arc.

Offering DiSEqC compatibility, positive satellite identification, and pinpoint accuracy. All-new digital satellite meter! used by professionals to make the installation of DBS satellite antennas and VSAT antennas much easier and faster.

Quick, Accurate, and Cost-effective Installations